Two really smart, compact USB lights that act as either a front or rear... its a 2Fer. With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Micro USB charging connection - LED fuel gauge/charge indicator - 180 degree visibility - No tools needed - 1 LiPo battery - 18 Grams
Has Your Back, And Front, Day Or Night. Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. Combined with 65 lumens on the rear DAYBLAZER 65, this combo is focused on safety, so you can focus on your ride. - 107 Grams (59 front, 48 rear) - 2 lithium polymer batteries included - Blitz 400 lumen, 1 hr runtime; low 200 lumen, 1.5 hr runtime; pulse 200 lumen, 6 hr runtime; strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - Solid 50 lumen, 1.6 hr runtime; high flash 65 lumen, 3 hr runtime; low strobe 35 lumen, 6 hr runtime - IP-67 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.
“Blazing On A Budget" is how Blackburn should describe this light set. Featuring the DAYBLAZER 800 front light and the DAYBLAZER 65 rear light, this combo will get you noticed without breaking the bank. Both lights are spec'd with eye catching BLITZ mode and a multitude of mounting options. Perfect for year-round riding in the city or the country. DAYBLAZER 800 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 4 hour recharge time - Dual Beam Pattern - LED Charge Indicator - Runtime: High 1.5hrs (800 lumen), Medium 3 hrs (500 lumen), Low 5 hrs (300 lumen) - Runtime: Pulse/Strobe: 8hrs (200 lumen)/12 hrs (200 lumen) - 129g - DAYBLAZER 65 Rear Light - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.5hrs (50 lumen), Pulse/Strobe 3hrs (65 lumen) - 48g
Local 50 Front Light - Two bright LEDs pump out 50 lumens - 3 beam modes let you adjust light intensity and battery runtime for your rides - Clear silicone side bezel amplifies visibility on all sides - Flexible silicone mount fits any handlebar diameter or shape - Tool free battery door allows for easy battery replacement - Built to the ANSI FL-1 standard, which provides consistent light performance measurement guidelines - 3 modes: High: 50 lumens, Low: 25 lumens, Strobe: 25 lumens - Runtime: High: 26 hrs, Low: 50 hrs, Strobe: 122 hrs - Plastic Injection body - 3xAA replaceable batteries Local 10 Rear Light - Large lens power button is easy to turn on/off while pedaling or wearing gloves - Silicone mount, one size fits all - Built to the ANSI FL-1 standard, which provides consistent light performance guidelines and measurements - FL-1 ANSI Standard - 10 lumens - 2 modes: High: 10 lumens, Steady Flash: 10 lumens - Runtime: High: 70 hrs, Steady Flash: 140 hrs - Replaceable AA batteries
The brightest of the Local front lights with an extruded alloy lens bezel for extra durability paired with the brightest of the Local rear lights with an extruded alloy shell for extra durability. Local 75 Front Light - 2 bright LEDs push out 75 lumens - 3 beam modes let you adjust light intensity and battery runtime for your rides - Clear silicone side bezel amplifies side visibility on all sides - Flexible silicone mount fits all handlebar diameters - Tool free battery door allows for easy battery replacement - Built to the ANSI FL-1 standard, which provides consistent light performance measurement guidelines - 3 modes: High: 75 lumens, Low: 40 lumens, Strobe: 40 lumens - Runtime: High: 25 hrs, Low: 44 hrs, Strobe: 98 hrs - Silicone mount, 1 size fits all - Plastic Injection body - 3x AA replaceable batteries Local 20 Rear Light - Silicone mount, one size fits all - Large lens power button is easy to turn on/off while pedaling or wearing gloves - Built to the ANSI FL-1 standard, which provides consistent light performance guidelines and measurements - Extruded Alloy Shell - FL-1 ANSI Standard - 20 lumens - 3 modes: High: 20 lumens, Steady Flash: 20 lumens, Strobe: 20 lumens - Runtime: High: 40 hrs, Steady Flash: 70 hrs, Strobe: 86 hrs - Replaceable AA batteries
CatEye's Go Kit gives you what humans have been searching for since the Paleolithic: light and knowledge - all at an affordable price! For seeing the road and staying safe, you get CatEye's fine EL135 headlight and Omni 3 taillight, plus for tracking all your key riding stats, CatEye includes their 7-function Velo 7 computer. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs and a wide beam. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus 3 modes. Then, making every ride even more fun is CatEye's Velo 7 computer that displays your speed, distance, ride time and more on its easy-to-see screen. Like their lights it's easy to mount (to the stem or handlebars) and simple to operate. You'll love the large, bright display, and single large button for easily and quickly changing modes to see how your rides are going.
Page 1 of 1